|
|
Jiangsu Golden Delicious Control Technology Co., Ltd., |
|
TEL:0517-86867887 0517-86867888
0517-86867889
|
|
FAX:0517-86891587 |
Join Hotline:0517-86803168 13905232000
|
|
Technical Support:0517-86886468 |
|
Zip:211600 |
|
Address:Jiangsu Province, Lake County gongyuan Road, No. 1 |
|
|
|
You are Here > Home > Product |
DBS50 series of investment-type level transmitter
|
DBS50Series input type hydrostatic level transmitter is based on the measured height of liquid is proportional to the static pressure and the principle of the liquid, the use of diffused silicon or ceramic piezoresistive effect sensing element, the static pressure turn into electrical signals. After temperature compensation and linearity correction. Converted into 4-20mADC standard current signal output。
DBS50Series into the sensor type hydrostatic level transmitter part of the liquid directly into the transmitter portion of the free flange or bracket, the installation is extremely easy
◆Characteristics Good stability, high accuracy
Liquid level transmitter input directly into the measured medium, very easy to install and use。
Solid-state structure, no moving parts, high reliability, long life from the water, oil to the viscosity of the paste can be high-precision measurements, not measured medium foaming, sedimentation, electrical characteristics of a wide range temperature compensation. Input type level transmitter with power reverse polarity protection and overload current limit protection。
◆The main technical indicators Measuring range:0.3~100m(Chosen by the user)
Accuracy:0.2、0.5、1.0
Temperature:-20~80℃
Output signal: wire4~20mADC
Power supply: standard24VDC(12~36VDC)
Insensitive areas:≤±1.0%FS
Load capacity:0-600Ω
Relative humidity:≤85%
Protection:IP68
Explosion-proof mark:ExiaⅡCT4-6
◆Selection Table
Type spectrum |
Description |
DBS50 |
|
Input type hydrostatic level transmitter |
Class quality |
1 |
|
Cable type |
2 |
|
Rod(Sensor mounted on the bottom of the direct contact with the liquid medium) |
3 |
|
Preservation type |
4 |
|
Guide bar type(Sensors mounted on the upper, not direct contact with the media) |
Process of connection |
T |
|
Brackets |
N |
|
FlangeDN40 PN1.0 |
Y |
|
Special agreement |
Sensor connection material |
1 |
|
304 |
Rod |
2 |
|
316 |
3 |
|
316L |
4 |
|
Nitrile rubber and polyvinyl chloride compound |
Cable type |
5 |
|
PTFE,(Polypropylene flange) |
Proof mode |
O |
|
No proof |
E |
|
Essential safetyExia ⅡCT6 |
Display |
O |
|
Without on-site instructions |
Z |
|
With ammeter instructions(0-100%Scale) |
X |
|
With LCD digital display |
Weight conditions |
O |
|
Without weight |
W |
|
Need to weight |
|
-□ |
|
Mounting height(mm) |
|
-□ |
|
Measuring height(mm) |
|
-□ |
|
Measured medium density(g/cm3) |
|
|